Vintage Warehouse 65 Blown Head Gasket & Engine Block Repair Fluid
Here we have Gasket Fix, the revolutionary product that actually repairs broken gaskets, cracked head gaskets and repairs warped heads. Save hundreds if not thousands on costly repairs. Gasket Fix repairs your broken or cracked head gasket quickly and permanently. Gasket Fix is not a temporary solution!
Unlike some other products on the market today, Gasket Fix comes with a 100% money back guarantee
How does Gasket Fix work?
Gasket fix is a blend of cutting edge polymer science. It is a clean liquid that does not contain any iron fillings, fiber glass pieces or other types of solid additives. These could clog up and even damage an engine. We do not use fillers.
Simply pour Gasket Fix into your cold radiator and run the engine for around an hour.
As the engine heats up it, the scientific blend in Gasket Fix will penetrate cracked and or broken head gaskets and will permanently seal the holes. The heat from the engine will start a reaction with the Gasket Fix creating a super bond that they guarantee will last for as long as you own the car
How to use Gasket Fix in 3 simple steps!!
1. With a cold engine, open the radiator cap and pour in Elliott’s gasket fix. Replace the radiator cap.
2. Start the engine, then turn the heater and fan on full. Let the engine run for 60 minutes. After 60 minutes, let the engine completely cool and top up the radiator with coolant and water.
3. Drive your car as usual, gasket fix will continue to work as you are driving.
Important: If you are putting Gasket Fix into your car through an expansion tank, make sure that there is enough room in your cooling system for the gasketfix to penetrate your system otherwise the Gasket Fix will just site in the expansion tank.
For optimum results:- If you have tried inferior products flush your cooling system with water after disconnecting bottom radiator hose. Do not use a flushing agent.
Additional Gasket Fix Directions if you are experiencing back pressure or bubbling:
These directions are for people that have a lot of back pressure building in the cooling system, usually shown as bubbling in the header tank or air forcing past the coolant cap.
- Locate the cylinder causing the bubbling in the overflow tank or backpressure. (Remove plugs one at a time till bubbling stops.
- Before starting the engine, remove the spark plug or injector from the cylinder that was causing the bubbling in the overflow tank or back pressure. If accessible, remove injector wire from that cylinder. This will limit the amount of unburned fuel going into the combustion chamber.
- If you cannot find the spark plug that is missing, run the engine with the coolant level down to the top of the radiator core and with the radiator cap off or leave the expansion cap off the expansion bottle with water only just visible.
- Make sure to run the engine up to temperature with the spark plug /Injector out and for the one final time with the spark plug/injector back in place.
Gasket Fix Frequently asked Questions
Q) What is the background of the Gasket Fix™ product?
A) The Product was developed in Germany and has been through some very strict testing an independent laboratory. If used properly it has a 99% success rate.
Q) What is in Gasket Fix™?
A) Gasket Fix™ contains a mix of proprietary chemicals that have been blended in such a way that they form a bond when heated.
Q) Will Gasket Fix™ block my engines cooling system?
A) Unlike other brands, Elliott's does not use fibers or particles that can damage or clog an engines coolling system. Our product is a clear liquid.
Q) Can Gasket fix be used with anti-freeze?
A) Gasket fix works well with antifreeze.
Q) How long will Gasket Fix last?
A) Gasket Fix™ has been designed to be a permanent fix.
Q) Are there some problems that Gasket Fix™ will not fix?
A) Gasket Fix™ will not seal leaks in hoses, seals, water pumps, or extremely large cracks in the head or block resulting in the vehicle not starting. If it does not run Elliott’s Gasket Fix can not work as it relies on temperature.
Q) What do I do if I have used an inferior or other product making similar claims?
A) If you have used an inferior product you must flush the radiator with water to clean it before using gasket fix.
Q) What precautions should I take with Gasket Fix™?
A) Gasket Fix™ should be kept out of reach of children. Avoid eye or skin contact. If eyes or skin become irritated with Elliott’s Gasket Fix™, rinse with cold water immediately. If swallowed, do not induce vomiting. Call a doctor immediately.
Q) Do I need to drain the coolant system before using Gasket Fix?
A) You need clean coolant in the system, if yours is old or full of oil you must change it first then add Elliott’s Gasket Fix.
Q) What if I have oil leaking ?
A) Elliott’s Gasket Fix will not fix oil leaks, only coolant related leaks on the head gasket.
Q) Do I need to flush the coolant if I am using Elliott’s Gasket Fix a second time as it initially did not work?
A) If the coolant was fresh and clean add Elliott’s Gasket Fix, if dirty flush it first.
Gasket Fix Lifetime Guarantee*
The Manufacturers Gurantee that Gasket Fix will permanently and effectively repair a blown head gasket, cracked head or block for your entire ownership time of the vehicle or Engine
If the problem reoccurs at anytime during your ownership of the vehicle, boat or engine, we will provide a one off replacement treatment of gasket fix.
If you would prefer a full refund, we are happy to do so providing you send us a letter from a registered mechanic stating that Elliott’s Gasket Fix did not repair your car.
Please note - Guarantee is given ny the manufacturer 'Elliots' and not by the re-seller Vintage warehouse 65 therefore all claims without exception need to be made directly with 'Elliots' the manufacturer via the contact page on their website
http://gasketfix.com/html/guarantee.html - http://gasketfix.com/html/contact_us.html
* Terms and Conditions
1) Guarantee refunds will only be issued with a letter from a VAT registered & licensed mechanic stating that the product failed to fix your head gasket, this letter must include the vhicle registration details along with what tests where done to ascertain the products failure.
2) Only one refund per vehicle.
3) Refunds will only be issued on the basis that the gasket fix usage directions were followed properly.
4) Refunds will only be issued for the recommended amount needed for your engine size, to a maximum of 3 bottles excluding postage and packing which is equal £24.95 per bottle
5) You must contact us within 40 days of purchase, after this time period, we will not initiate a refund
6) Once we have issued a refund cheque and provided you with the registered mail tracking details, this will be tended as full and final settlement against any failure/fault claims resulting from the use of Elliotts gasket fix which will be deemed to been accepted by you and therefore be contractually binding. No further discussion will be entered into.
Mk1 Golf / T2 Camper / Beetle Mk2 Golf 7" sealed beam Pro Kit 7" Sealem Beam Upgrade
We Have A Full Range Of Accessory Lamps in Stock From Ring & Wipac, Click On The Images To Veiw
Round Drive/Spot Rectangle Drive/Spot Round Fog Rectangle Fog
Need a Wiring kit With Relay and Switch or Prefer A Classic Chrome Lamp, Click on the images to veiw
Full range of Securon Seat Belts & accessories available in our store just click on the image to view and please feel free to call to speak with one of our specialist's or message us with any enquiry
Mounting Points, Extensions and Childrens Height Adjusters all available
Click on an image to veiw!
